China 8 Year Exporter Non Climb Fence Machine - 358 Security Fence Welding Machine – Jiake Manufacture and Factory

8 Year Exporter Non Climb Fence Machine - 358 Security Fence Welding Machine – Jiake

Short Description:

Product Detail

Product Tags

Feedback (2)

We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for Welded Steel Fence Machine, Stainless Steel Gabion Baskets Machine, Concrete Mesh Sheets Machine, Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.

8 Year Exporter Non Climb Fence Machine - 358 Security Fence Welding Machine – Jiake Detail:

The anti-climb fence panel machine also called 358 panel machine, 358 fence machine, anti-climb fence mesh machine, 358 welded fence panel machine, is used to make fence mesh, reinforcing mesh, road mesh, explosion-proof wall, shelf, etc.

1.Technical Parameter:

Model	DP-FP-3200A+
Wire diameter	3-6mm
Line wire space	76.2-300mm
Cross wire pitch	Min.12.7mm
Mesh width	Max.3200mm
Mesh length	Max.3000mm or bigger
Welding electrodes	44pcs
Welding transformer	150kva*11pcs
Welding speed	Max.120 times/min
Line wire feeding	Pre-straightened&pre-cut
Cross wire feeding	Pre-straightened&pre-cut
Power supply	Min.250kva
Weight	5.8T
Machine size	5.43.72.3m

2.YouTube Video

3.Superiorities of 358 fence panel production line

Pneumatic electrodes, electrodes welding pressure are the same, finished mesh panel very flat.

Single connection technology for each pair of upper electrode and its lower electrode, only welding spots are conducted electricity, finished mesh panel very flat.

The pre-straighted & pre-cut line wires fed by new type “V” type slot tunnel, suitable for different diameter, finished line wire space more accurate than before.

The pre-straighted & pre-cut cross wires fed by hopper automatically, SMC (Japan) air cylinder control, more precise.

The electro-magnetism valve is SMC brand (Made in Japan). The quality is much better.

Panasonic (Japan) servo motor & planetary reducer for pulling mesh, more precise.

The cable carrier is Igus brand, imported from Germany, very good quality, not hung down.

4.Finished 358 Panel Mesh

wfe

Product detail pictures:

Related Product Guide:

We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 8 Year Exporter Non Climb Fence Machine - 358 Security Fence Welding Machine – Jiake , The product will supply to all over the world, such as: Detroit, Bolivia, Macedonia, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Fence Mesh Making Machine